Life can be very hectic, and the amount of responsibilities we all have are endless, especially here in Nassau County NY. It is very easy to overlook some things, especially if they are not an immediate emergency. But one very important item to make sure you keep up on is servicing your boiler. Servicing your boiler once a year is not only necessary for ensuring that it is running efficiently and safely, but there are long term benefits as well. These benefits include keeping your warranty intact, keeping your energy bills down and ensuring that you lower your risk of an emergency situation. The best way to avoid having a heating issue once you are in the heart of the cold months of Fall and Winter in Nassau County is to keep up on your annual servicing. Whether you are a homeowner or an owner of a business, keeping your loved ones and employees safe and warm should be of the utmost importance. We here at KS Mechanical Services in Levittown NY in Nassau County are here to help.
It is very easy for the year to get away from us. Waiting until the cold comes to NY to service your boiler could be risky. Scheduling your servicing in the warmer months gives you the advantage where if there were an issue spotted, the repairs could be made without putting yourself and your family in an uncomfortable or dangerous position. If repairs need to be made they can be worked on and completed before the cold sets in. This allows you the confidence to embrace those chilly NY seasons and take that worry off of your plate.
We pride ourselves here at KS Mechanical Services in Levittown NY in working efficiently and ethically. We engage in a thorough inspection, taking a full assessment of the condition of the units and any issues that may come up as a concern. All findings will be discussed so our customers have a full understanding of what the situation is and what their options are.
What a Service Inspection Looks Like
The servicing starts with a visual inspection. Here we will be going over the entire unit, looking for any immediate signs of damage or distress. Our KS Mechanical Services technicians will then test all controls and operations, ensuring that all safety devices and functions are performing properly. An inspection of the flue is done to ensure that there aren’t any obstructions and that it is attached properly. Our engineer will remove, clean and inspect all of the main components in the boiler to ensure everything is attached and performing properly with no visual damage or defect.
Additional checks are made including but not limited to inspecting and testing the pilot burner, flame sense device, thermostat, ventilation, flue, heating controls, electrical wiring connections, location of the boiler and the contents surrounding it, gas and pressure flow, seals, safety devices and overall boiler operation. All of these findings are recorded to keep for future reference.
Sign to Look Out for that there May Be a Problem
While you should be servicing your boiler once a year, there are some important signs to look out for that would indicate an absolutely necessary service call. Take a look at the flame. If it is flickering in an irregular pattern or if the flame is yellow that is an indication to call for a servicing. This usually means that your burner is not receiving enough air for complete combustion and must be looked at. If the pilot light is going out often then that may be an issue with the thermocouple. This is concerning because while the flame may be out, the gas is still being supplied. If there are new stains or smoke marks on the unit or on anything nearby the unit. This could be caused by misfiring of the unit when it starts back up and cause not only damage to items near the unit from the puffback but be an issue with the proper functioning overall. If the boiler overheats or refills regularly this could be a sign of the malfunctioning of the safety features, or if the water pressure drops there is potentially a leak somewhere.
Best Way to Prevent an Emergency Situation
The best way to avoid emergency repairs is to have your boiler serviced regularly. A yearly inspection and servicing will get you ahead of any potential problems and deal with them before they become an emergency. Servicing your boiler annually will not only keep you ahead of any issue but it will give you peace of mind as well. Handling any issue while the weather is still comfortable and tolerable is in your best interest. It will make any repairs that need to be done less challenging for you and your family. Relieve yourself of any worry and stress as the cold months approach by knowing that your boiler is ready to take on the chill. If you look after a loved one who doesn’t live with you or know of someone who lives alone and may be in a bad position if their boiler were to have an issue, maybe it’s best to either suggest they have a check done on their boiler or you schedule a checkup for them as well. It’s always better to be safe than sorry.
We provide emergency boiler servicing as well as scheduled. If you do not have an emergency then we are happy to set up a servicing appointment to ensure your boiler is working safely and efficiently so that you are ready to face the cold Fall and Winter months with confidence. We pride ourselves in only doing work that is absolutely necessary and never taking advantage of our fellow, hardworking Long Islanders. Servicing is available for Nassau County along with the Greater NY area for all residential and commercial needs.
If you are looking for quality boiler servicing by a company with over ten years of experience, then look no further than servicing and boiler repair Levittown NY and the surrounding areas by KS Mechanical Services. We pride ourselves in supplying you with our expert technicians and our exceptional service department. Give us a call at 631-889-3617 today!
Levittown is a hamlet and census-designated place (CDP) in the Town of Hempstead in Nassau County, on Long Island, in New York, United States. It is located halfway between the villages of Hempstead and Farmingdale. As of the 2010 census, the CDP had a total population of 51,881, making it the most populated CDP in Nassau County and the second most populated CDP on Long Island, behind only Brentwood.
The building firm, Levitt & Sons, headed by Abraham Levitt and his two sons, William and Alfred, built four planned communities called ‘Levittown’, in New York, Pennsylvania, New Jersey, and Puerto Rico; the Levittown in New York was the first. Additionally, Levitt & Sons’ designs are featured prominently in the older portion of Buffalo Grove, Illinois; Vernon Hills, Illinois; Willingboro Township, New Jersey; the Belair section of Bowie, Maryland; and the Greenbriar section of Fairfax, Virginia.
The Levitt firm began before World War II, as a builder of custom homes in upper middle-class communities on Long Island. During the war, however, the home building industry languished under a general embargo on private use of scarce raw materials. William ‘Bill’ Levitt served in the Navy in the Seabees – the service’s construction battalions – and developed expertise in the mass-produced building of military housing using uniform and interchangeable parts. He was insistent that a postwar building boom would require similar mass-produced housing, and was able to purchase options on large swaths of onion and potato fields in undeveloped sections of Long Island.
Returning to the firm after war’s end, Bill Levitt persuaded his father and brother to embrace the utilitarian system of construction he had learned in the Navy. With his brother, Alfred, who was an architect, he designed a small one-floor house with an unfinished ‘expansion attic’ that could be rapidly constructed and as rapidly rented to returning GIs and their young families. Levitt & Sons built the community with an eye towards speed, efficiency, and cost-effective construction; these methods led to a production rate of 30 houses a day by July 1948.They used pre-cut lumber and nails shipped from their own factories in Blue Lake, California, and built on concrete slabs, as they had done in a previous planned community in Norfolk, Virginia. This necessitated negotiating a change in the building code, which prior to the building of this community, did not permit concrete slabs. Given the urgent need for housing in the region, the town agreed. Levitt & Sons also controversially utilized non-union contractors in the project, a move which provoked picket lines. On the other hand, they paid their workers very well and offered all kinds of incentives that allowed them to earn extra money, so that they often could earn twice as much a week as elsewhere. The company also cut out middlemen and purchased many items, including lumber and televisions, directly from manufacturers. The building of every house was reduced to 26 steps, with sub-contractors responsible for each step. His mass production of thousands of houses at virtually the same time allowed Levitt to sell them, with kitchens fully stocked with modern appliances, and a television in the living room, for as little as $8,000 each (equal to $92,721 today), which, with the G.I. Bill and federal housing subsidies, reduced the up-front cost of a house to many buyers to around $400 (equal to $4,636 today).
Here are some boiler-related links: